![]() ![]() Head down below to see the results of the test. I recorded videos of the camera during testing to know the total time of writing in which I depended on the camera’s light indicator. The test was to continuously shoot in RAW for 30 seconds and determine how much data could be written to the SD card. I wanted to verify the card performance using my camera and determine if my camera would choke on its image buffer (which would make me regret the SD card purchase). The faster the writing to the card, the faster the buffer clears. The buffer can help photographers in burst shooting to capture more photos while writing in the background. Digital cameras have a memory buffer that stores images temporarily before getting written to the SD card. SD CardĪfter the satisfying benchmark results from CrystalDiskMark, now let’s head on to the integration test with the Fujifilm X-A10 camera. For my SanDisk Ultra card, its write speed is less than 30 MB/s which might explain why I was encountering some write delays. The results confirmed that the Extreme PRO SD card I bought is up to its rating. ![]() I included some of my existing SD cards to the test for comparison. ![]() I set CrystalDiskMark’s test count to five with one GB test data. I used the UGreen USB 3.0 Card Reader for connecting the SD cards to my machine where CrystalDiskMark v6.0.2 圆4 is installed. Software Test - CrystalDiskMark (v6.0.2 圆4) ![]() There’s no actual write speed rating based from the product specification but it will surely be slower than its read speed. It is a class 10 UHS-I card and has a read speed rating of 48 MB/s. I am using the SanDisk Ultra freebie back when I bought my camera. It is an open-source disk benchmark tool for measuring the read and write performance of your hard disk, SSD, and/or flash drives.Īlso, this software gave me an opportunity to measure my current SD card. For this verification, I found a great software named CrystalDiskMark. It would be a waste if I bought a fake memory card that performs like a lower class one. Testing the SD CardĪs there are many fake memory cards being sold today, first, I wanted to verify the performance of the card I bought if it lives up to the rating of the manufacturer. Double check the credibility of the sellers before buying. Also, please be aware that there are many fake memory cards. Note: Prices are rounded up and are not the SRPs as of 25-November 2018. I gave more importance to the write speed ratio as compared to the price to capacity ratio for this case. Aside from the write speed rating difference, the Extreme PRO has a better bang for my buck because of the price to write speed ratio. The Extreme version only supports a write speed of up to 40 MB/s for 16-64 GB and up to 60 MB/s for the 128-256 GB variants. Tip: I prefer to carry more smaller capacity cards to lessen the risk of losing all my photos in case of a broken or corrupted card. I opted to buy the Extreme PRO instead of the Extreme version because of the write speed rating difference. It has a read speed rating of up to 95 MB/s and up to 90 MB/s for its write speed. I recently purchased a 32GB SanDisk Extreme PRO which is a class 10 UHS-I U3 card. You might also see the Ultra High Speed-I (UHS-I) interface classes, U1 or U3, indicating a minimum write speed of 10 MB/s and 30 MB/s, respectively. In case you are not yet familiar with the SD card speed classes, you will usually see classes 2, 4, 6, and 10 the numbers indicate the minimum write speed of the card in Megabytes per second (MB/s). Tip: JPEGS are quite handy because whenever I am lazy to do some RAW editing, I can just easily transfer the photos to my smartphone and upload to some social media platform. Given the numbers, I might be hitting the maximum write speed of my SD card and might be needing an SD card that is faster in writing ~30 MB at a given time frame. The approximate size of my camera’s output is 24 MB for RAW and 5MB for JPEG. I usually take pictures in RAW + JPEG mode using my Fujifilm X-A10. But, I was already using a class 10 card! How come I was still encountering some bottleneck? You might have heard that you need a class 10 SD card at the minimum in order not to encounter some bottleneck when taking pictures. My camera did not let me take another shot without waiting for the write operation to finish. When taking pictures before, there were times when my camera froze due to some write delays. Having a reliable storage medium is a must for preventing data loss and corruption, but how about the performance of the SD card? They are very important to a camera setup because they are like analog camera films where the pictures are stored in. SD (Secure Digital) cards are the common storage media being used by modern digital cameras. Software Test - CrystalDiskMark (v6.0.2 圆4).A Fast SD Card for Your Camera: Do You Need One? ![]()
0 Comments
Leave a Reply. |